Back to Blog Agronomy

From the field: Stine® 2026 harvest wrap-up

November 2026 

The U.S. Department of Agriculture’s latest Crop Progress Report shows that 81% of corn and 92% of soybeans have been harvested across the top production states. With harvest at or near completion for many regions across the U.S., the results offer insight into what worked well and what needs to be on our radar heading into 2027.

From the field: Stine® 2026 harvest wrap-up

Stine® Seed Company agronomists share how the season shaped up for Stine growers and in our research plots throughout the country in this special harvest wrap-up edition of Stine Weekly.

Midwest Wrap-Up

Northern Illinois

Stine Soybean Technical Agronomist Tyler DuBay notes that harvest is close to completion in northern Illinois, with soybeans complete and only some corn remaining. Product maturity has been a big focus of conversation in the region.

“We have been seeing a lot of early maturities shift performance south and outperform current standards,” he says.

Looking ahead, DuBay recommends farmers consider planting earlier varieties for several reasons, including the ability to harvest earlier, avoid the peak disease window and bring in better yields.

“Stine 26EK29 is a good example of that within Illinois,” he adds.

As far as top performers, DuBay notes that Stine 32EJ12 and 36EH32 are lines to watch.

“Stine 32EJ12 and 36EH32 have been the consistent gold standard this fall when it comes to performance and yield,” he says. “Timely rains have made the plants full of beans to the point that they are bending over without lodging. Yields have been terrific consistently across the whole field and within plots, showing that they are the gold standard within the group 3 maturities.”

Central and southern Illinois, eastern Missouri, southern Indiana, and northern Kentucky

Stine Field Agronomist Ian Matzenbacher says harvest in his area went smoothly and on time. With the exception of a few areas in northern Missouri, harvest is around 95% complete.

When it comes to product performance, Stine had an outstanding year in this region.

“Luckily, for my territory, we have so many great options on the corn and soybean side that it's hard to talk about all of them,” says Matzenbacher. “The general consensus for corn is that there was good performance from Stine 9755-20, 9721-30, 9754-20 and 9891-20. The soybeans had a great year with a lot of lines that performed well across my geography, including Stine 24EH32, 27EG22, 30EH32, 33EJ29, 36EH32, 37EG23, 39EH23, 40EH92 and 42EJ20. We have a lot to look forward to next year with the new EK soybeans, including 35EK92, 36EK32 and 38EK29.”

Wisconsin and Minnesota

Stine Field Agronomist Derek Dreier says they’re at the tail end of harvest in southern Wisconsin and southeastern Minnesota. Stine products are standing up and standing out in the region.

“Some of the standouts have been Stine 9531-22 and MX471-G,” he says. “Additionally, 9532-30 — a new 103 Trecepta® — has shown some exciting yield potential. And Stine 9817-30 continues to be a go-to line for corn silage.”

On the soybean side, Dreier notes that Stine 12EE63, 17EJ22 and 19EC12 performed well.

“All the new K-series beans have been impressive and have shown exceptional yields and standability,” he adds. “Stine 18EK32, 22EK92 and 24EK21 are some new lines to keep an eye on heading into 2027.”

In other parts of Wisconsin, Stine Field Agronomist Erik Salm says soybean harvest is all but wrapped up, and corn is in the home stretch.

“As of Nov. 8, USDA had Wisconsin soybeans 97% harvested and corn for grain 72% harvested — a point ahead of the five-year average, with grain coming off around 17% moisture,” he says. “Rain slowed things down last week, but the weather looks to straighten out again next week.”

For products, Salm notes that Stine MX481-G — a 97–99-day maturity line — continues to show its adaptability.

“It won multiple plots this fall, and it has averaged above the plot average in Wisconsin in each of the past two seasons,” he adds.

Western Minnesota, northern South Dakota and North Dakota

After a very dry summer, Stine Field Agronomist Susan McBrady says rain settled in, making harvest challenging and causing delays. Fortunately, most of the crop had been taken out prior to the last major rain event, so there’s just a little harvest left.

Some product highlights for the region included Stine 05EK12 and 11EK39 on the soybean side.

“Both dominated their plot maturity set and offer strong agronomics to be successful in the field,” she says.

On the corn side, McBrady adds that two additions to the early lineup are showing through: Stine MX261-G and MX321-10.

“Both offer strong seedling vigor, setting them up for success early, and they handle the mid- and late-season stress very well, finishing the season strong,” she notes.

Nebraska and Kansas

Stine Field Agronomist Daniel Greblunas reports that harvest in his territories in Nebraska and Kansas is roughly 75% complete for corn and 90% for soybeans. A wet fall delayed the start of harvest and kept growers out of the fields once it began, but the recent stretch of favorable weather has allowed some to finish up.

Late-season moisture and heavy disease pressure have led to some stalk quality concerns in the region, but a few Stine lines showed strong performance in the tough conditions.

“A couple of corn numbers that really stood out this year were Stine 9690-30 and 9891-20,” says Greblunas. “Both showed great performance paired with extremely high grain quality.”

Although there were some seed quality concerns for soybeans in the region, he notes that Stine varieties really shined. 

“Overall, soybeans have had impressive yields,” says Greblunas. “A couple of soybean numbers that stood out were Stine 30EH23 and 36EH32. Both have high-yield potential paired with great standability, which makes for easy combining.”  

Iowa and South Dakota

For Iowa and South Dakota, it’s been a long, drawn-out harvest, according to Stine Technical Agronomist Tony Lenz. While soybeans are mostly wrapped up, a few wet areas in both states still need to be harvested. Even so, yields have been impressive.

“Soybean yields have been tremendous in nearly all areas, with good September rains helping fill the pods and side branches of our Enlist E3® soybeans,” says Lenz. “The new EK series has been a huge bright spot, with lines like 19EK02, 22EK92 and 24EK21 standing out, along with 17EJ22, 25EJ92 and 36EH32.”

Corn harvest has been another story, though a handful of Stine hybrids have performed well. 

“Corn has been up and down, with a lot of corn still to be harvested,” says Lenz. “Stalk rots and down corn have been an issue in many wet areas, but we’ve really liked the yields on a few key lines, including Stine MX471-G, MX481-G, MX551-G and 9754-20. Some new ones to keep your eyes on are 9532-30 and 9690-30.”

Southern Minnesota and eastern and central Iowa

In Stine Field Agronomist Ally Larson’s region, harvest is still in progress.

“Harvest in eastern Iowa and southern Minnesota is progressing, with only a few plots left to harvest for 2026,” says Larson.

She notes that Stine hybrids and varieties had strong performance in both regions.

“Corn yields in eastern and central Iowa and southern Minnesota were solid, with few hybrids falling below 230 bu/acre,” says Larson. “Standout lines include Stine 9532-30 and MX471-G. Soybean yields for Iowa were consistently between 60–70 bu/acre, with standouts including Stine 24EH32 and 22EK02.”

Indiana, Michigan and Ohio

Stine Field Agronomist Jacob Foote notes that late planting, untimely rains and a milder summer played a major role in delaying harvest across much of Indiana, Michigan and Ohio. That said, growers have made significant progress over the last few weeks.

“More growers are getting wrapped up for the year each day,” he says.

Foote notes that several Stine products displayed consistent performance and yields across the board.

“Lines like Stine 9721-30, 9662-20, MX521-G, MX481-G and 9532-30 continue to rise to the top of our Product Development Plots (PDP),” he says. “On the early side, MX481-G and MX521-G pair excellent late-season plant health with strong yield potential and versatility, while 9532-30 provides unmatched yields in high-yield environments. Stine 9721-30 and 9662-20 are in a later maturity group but have been the top lines to beat across Indiana and Ohio.”

Southern Wrap-Up

Southeast Kansas, southwest Missouri, Arkansas, Louisiana and Mississippi

Stine Technical Agronomist Brett Gordon, who covers parts of Kansas and Missouri, along with Arkansas, Louisiana and Mississippi, notes that corn harvest wrapped up at the end of September. However, soybean harvest is still ongoing in parts of Region 9 (southeast Kansas and southwest Missouri) with double-crop soybeans.

“Overall, corn yields were very good, and Stine 9753-20 performed well across my territory,” notes Gordon. “On the soybean side, customers have been pleased with the performance of Stine 49FF20, while 46EK29 has been a standout in my PDP plots.”

Georgia, Florida, North Carolina, South Carolina, Kentucky and Tennessee

Stine Technical Agronomist Bill Kessinger notes that harvest was “very good” in the southeastern U.S., especially in Georgia and Florida.

“Silage and grain did well, with Stine 9755-20 standing out at the top of the University of Florida silage test,” he says.

 In the Carolinas, however, growers experienced very dry yield, which is not typical for the region. Overall, Stine 9755-20 performed well and, according to Kessinger, ranked at the top of the North Carolina Official Variety Testing trials. The new Stine 46EK29 also had strong performance in Stine’s PDP plots.

In Kentucky and Tennessee, Kessinger says growers had one of the best crops they’ve ever had in the area. 

“Rains were almost perfect all year,” he says. “Stine 9891-20 and 9753-20 had bin-buster yields, and several soybeans shined. It’s hard to pick just a couple, but Stine 42EJ20 and 46EK29 are at the top of the leaderboard.”

Northeastern Wrap-Up

New York, Pennsylvania, Rhode Island, Massachusetts, Vermont, New Hampshire, Virginia, Maryland and Delaware

In the Northeast, Kessinger notes that weather was all over the place. The area experienced drought in some areas and excess moisture in others. He says it was also very cloudy all year, and the lack of sunshine slowed progress. Rootworm damage in corn-on-corn acres was an issue in the region as well.

As for product performance in the northeastern U.S., Kessinger notes that Stine 9444-22 and 9532-30 did well on the corn side. On the soybean side, Stine 36EH32 and 30EH32 were consistently good, with the new 26EK29 looking great in plots.

Whether consistent performance or top-end yields are your goal in 2027, connect with your local Stine representative to start planning for the season ahead. For year-round support, ask how our Yield Maximizer Program can benefit your acres through custom planting recommendations, in-field agronomic insights and ongoing customer service.